undefined
undefined
undefined
undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined

EODD Pump

E25

MOTOR POWER MAX FLOW RATE
 1.5 kw  9m³/h
MAXIMUM MOTOR SPEED MAX PRESSURE
 129 r/min  4bar (58psi)
LIQUID INLET MAX DIAMETER SOLIDS
 25mm(1")BSPT  6mm(1/4")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 25mm(1")BSPT  0.42L(0.11gal)
CONNECTION TYPE  *1 cycle=2 strokes
 BSPT(Threaded) MATERIAL
 ANSI DIN(Flanged)  316L/CI/PP/PVDF/PPH
MAX SUCTION LIFT CAPABILTY MAX OPERATING TEMPERATURE
 3.5m(12')Dry,9.2m(30')Wet  135℃(275℉)

Characteristic

Low noise, high efficiency, smooth operation

  • High energy efficiency motor drive; energy consumption can be as low as 1/5 of pneumatic diaphragm pump
  • No rotating or moving fluid seals, can be idled
  • Maximum self-priming height can reach 5m
  • Unique backpressure protection design can prolong the service life of the diaphragm
  • Special material crankshaft drive structure ensures strength and service life
  • Visible diaphragm leakage
  • Convenient flow control; the combination of frequency converter and broadband motor can realize accurate flow control
  • Pressure relief valve can be installed on the outlet pipe to automatically develop  the unloading pressure when the set pressure is exceeded, so as to avoid damage to the pump caused by excessive pressure
  • Torque limiting coupling; in case the pump chamber exceeds the set pressure and the coupling slips, the damage of the pump caused by high pressure can be avoided.

Dimensions

Material

MATERIALS PART
Material of wetted parts Cast iron, 316L stainless steel,PP polypropylene,PVDF polyvinylidene fluoride, PPH modified polypropylene
Material of non-wetted parts Center body (aluminum alloy(electrophoresis),anodized aluminum, PP polypropylene, 316L stainless steel)
MATERIALS PART
Santoprene -40°C to 107°C (-40°F to 225°F)
Neoprene -18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F)
EPDM -51°C to 138°C (-60°F to 280°F)
Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F)

 

 

Accessories