搜索
Search

EN  |  中文

PRODUCTS

1 / 1

E50

MOTOR POWER MAX FLOW RATE
 4 kw  24m³/h
MAXIMUM MOTOR SPEED MAX PRESSURE
 102 r/min  4bar (58psi)
LIQUID INLET MAX DIAMETER SOLIDS
 51mm(2")BSPT  9mm(3/8")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 51mm(2")BSPT  1.63L(0.43gal)
CONNECTION TYPE  *1 cycle=2 strokes
 BSPT(Threaded) MATERIAL
 ANSI DIN(Flanged)  316L/CI/PP/PVDF/PPH
MAX SUCTION LIFT CAPABILTY MAX OPERATING TEMPERATURE
 5m(16')Dry,9.2m(30')Wet  135℃(275℉)
零售价
0.0
市场价
0.0
数量
-
+
库存:
0
1
参数指标
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Characteristic

Low noise, high efficiency, smooth operation

  • High energy efficiency motor drive; energy consumption can be as low as 1/5 of pneumatic diaphragm pump
  • No rotating or moving fluid seals, can be idled
  • Maximum self-priming height can reach 5m
  • Unique backpressure protection design can prolong the service life of the diaphragm
  • Special material crankshaft drive structure ensures strength and service life
  • Visible diaphragm leakage
  • Convenient flow control; the combination of frequency converter and broadband motor can realize accurate flow control
  • Pressure relief valve can be installed on the outlet pipe to automatically develop  the unloading pressure when the set pressure is exceeded, so as to avoid damage to the pump caused by excessive pressure
  • Torque limiting coupling; in case the pump chamber exceeds the set pressure and the coupling slips, the damage of the pump caused by high pressure can be avoided.

Dimensions

Material

PART MATERIALS
Material of wetted parts Cast iron, 316L stainless steel,PP polypropylene,PVDF polyvinylidene fluoride, PPH modified polypropylene
Material of non-wetted parts Center body (aluminum alloy(electrophoresis),anodized aluminum, PP polypropylene, 316L stainless steel)
Air valve ×
PART MATERIALS
Santoprene -40°C to 107°C (-40°F to 225°F)
Neoprene -18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F)
EPDM -51°C to 138°C (-60°F to 280°F)
Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F)

 

 

未找到相应参数组,请于后台属性模板中添加
上一个
下一个

Accessories

  • Diaphragm
    PART MATERIALS
    Santoprene -40°C to 107°C (-40°F to 225°F)
    Neoprene -18°C to 93°C (0°F to 200°F)
    Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
    Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
    EPDM -51°C to 138°C (-60°F to 280°F)   
    Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
  • Valve Seat
    PART MATERIALS
    Santoprene -40°C to 107°C (-40°F to 225°F)
    Neoprene -18°C to 93°C (0°F to 200°F)
    Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
    Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
    EPDM -51°C to 138°C (-60°F to 280°F)   
    Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
  • Valve Ball
    PART MATERIALS
    Santoprene -40°C to 107°C (-40°F to 225°F)
    Neoprene -18°C to 93°C (0°F to 200°F)
    Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
    Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
    EPDM -51°C to 138°C (-60°F to 280°F)   
    Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 

Leave Message

全部评论
已有0条评论
There is currently no content to display
Please add data record on website background.

CONTACT US

Add: No. 438, Jinyuan 8 Road, Jiading District, Shanghai, China

Service line: 400-891-9365

© 2021 Skylink Fluid Technology(shanghai) Co.,Ltd.  All rights reserved.       沪ICP备12048026号