搜索
Search

EN  |  中文

PRODUCTS

1 / 1

PDSK40

BULK DENSITY MAX FLOW RATE
 0.08-0.8 g/cm³  2500 Kg/h
AIR INLET MAX PRESSURE
 3/4"BSPT  8.6bar (125psi)
LIQUID INLET MAX DIAMETER SOLIDS
 38mm(1-1/2")BSPT  6.3mm(1/4")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 38mm(1-1/2")BSPT  1.2L(0.34gal) *1  cycle = 2 strokes
CONNECTION TYPE MATERIAL
 BSPT(Threaded)  AL/316L/CI
 ANSI DIN(Flanged) WEIGHT
MAX SUCTION LIFT CAPABILITY  36kg(AL)/56(CI/316L)
 5.8m(19')Dry, MAX OPERATING TEMPERATURE
 9.2m(29.5')Wet  135℃(275℉)
零售价
0.0
市场价
0.0
数量
-
+
库存:
0
1
参数指标
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Characteristic

New perfect powder transportation equipment with low failure rate

  • Can replace the inefficient manual powder transportation mode and be directly applied to the transportation of solid powder to reduce air pollution and raw material waste
  • Adopts the fully closed transportation mode to directly transport the powder from the raw material container to the receiving container at the formula, so as to reduce dust pollution in the working environment and ensure personal safety
  • Maximum bulk density of transporting powder can reach 0.8g/cm3, the maximum siphon height can reach 5m, and the maximum transporting capacity can reach 5,500Kg/h
  • Intermittent high efficiency airflow induced fluidization system can optimize the material and gas ratio, reduce gas consumption and material gas-solid ratio, and prevent powder accumulation;​
  • Separated fluidizing gas and driving gas can avoid the oxidation and deliquescence of the material in contact with the air and the gas in contact with the powder can be further purified and dried separately, or use other gases.
  • Can replace air mixed transportation, screw transportation and scraper transportation
  • can continuously transfer dry powder with specific gravity up to 0.8g/cm3 without failure, such as carbon black, pigment powder, combustion supporting agent, expanded mica, silicone, acrylic resin, 3D printing powder, silicone resin and pharmaceuticals, etc.

Dimensions

 

Material

PART MATERIALS
Material of wetted parts Aluminum alloy, 316L stainless steel
Material of non-wetted parts Aluminum alloy(electrophoresis)
Air valve Aluminum alloy(electrophoresis)
PART MATERIALS
Santoprene -40°C to 107°C (-40°F to 225°F)
Neoprene -18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F)
EPDM -51°C to 138°C (-60°F to 280°F)
Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F)

 

 

未找到相应参数组,请于后台属性模板中添加
上一个
下一个

Accessories

  • Diaphragm
    PART MATERIALS
    Santoprene -40°C to 107°C (-40°F to 225°F)
    Neoprene -18°C to 93°C (0°F to 200°F)
    Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
    Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
    EPDM -51°C to 138°C (-60°F to 280°F)   
    Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
  • Valve Seat
    PART MATERIALS
    Santoprene -40°C to 107°C (-40°F to 225°F)
    Neoprene -18°C to 93°C (0°F to 200°F)
    Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
    Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
    EPDM -51°C to 138°C (-60°F to 280°F)   
    Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
  • Valve Ball
    PART MATERIALS
    Santoprene -40°C to 107°C (-40°F to 225°F)
    Neoprene -18°C to 93°C (0°F to 200°F)
    Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
    Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
    EPDM -51°C to 138°C (-60°F to 280°F)   
    Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
  • Air valve
    Aluminum alloy(electrophoresis),anodized aluminum, PP polypropylene, 316L stainless steel

Leave Message

全部评论
已有0条评论
There is currently no content to display
Please add data record on website background.

CONTACT US

Add: No. 438, Jinyuan 8 Road, Jiading District, Shanghai, China

Service line: 400-891-9365

© 2021 Skylink Fluid Technology(shanghai) Co.,Ltd.  All rights reserved.       沪ICP备12048026号