搜索
Search

EN  |  中文

PRODUCTS

Products

All categories

Products

Homepage
/
F/SF Series Hygienic/FDA Pump
/
Product

Product

We are specialized in a wide range of wire mesh and its deep processing products, including different kinds of wires, wire mesh, metal mesh，polyester and nylon bolting cloth, filters and filter accessories.
FAST Viscometer
FAST Viscometer
FAST Viscometer
MEASUREMENT TYPE REPEATABILITY
 Torsionally oscillating probe   ±1.0% of reading
PROCESS CONNECTIONS MEASUREMENT RANGE
 ¾” standard, (1, 2½” tri-clamp or 3A design, optional)   1 to 3,000 (optional 12,000) cSt using an NIST traceable, Newtonian fluid measured at 25°C
WETTED SURFACES SENSOR
 Isolast for probe  Viton for chamber housing (EDPM or Kalrez®, optional)
TEMPERATURE (FLUID) PRESSURE RANGE
 -4°F to 248°F(-20°C to 120°C)  Vacuum to 200 psig max
Details 白箭头 黑箭头
TT100
TT100
TT100

Viscosity Range

10 - 500,000 (cP/mPa·s)

Speeds

Single speed: application specific

Input Power

115 Vac: 50/60 Hz, 230 Vac; 50/60 Hz, 24 VDC

Output

4 - 20 mA

Details 白箭头 黑箭头
VTE Electric Viscosel
VTE Electric Viscosel
VTE Electric Viscosel

Range

10-10,000 cP

Output

4-20 mA

Control Signal

Up to 3 amp solenoid relay control

Display

Digital display of viscosity units

Electrical code

NEMA 1

Details 白箭头 黑箭头
PVS Rheometer
PVS Rheometer
PVS Rheometer

PVS Rheometer Ranges

BOB/STATOR
SAMPLE CUP

VISCOSITY RANGE cP
(mPa·s)

SHEAR RATE
(sec-1)

SAMPLE VOLUME
(mL)*

PVS-B1-D-HC

2-5M

1.7N

12

PVS-B2-D-HC

20-36M

0.38N

55

PVS-B5-D-HC

5-10M

0.85N

25

PVS-TA5B5-D-HC

.5-1M

0.85N

160


* ± 1mL HC=Hastelloy C M=1 Million N=RPM mL=Milliliter
Details 白箭头 黑箭头
HM0002
HM0002
HM0002
MAX FLOW RATE MAX PRESSURE
 2.25L/h   34 bar
NUMBER OF STROKES MOTOR POWER
 36/min   0.25/0.37 KW
Details 白箭头 黑箭头
X1-01
X1-01
X1-01
CALIBER MAX FLOW RATE
 1/2   1450 RPM@50Hz 8.9lpm
MAX CONTINUOUS PRESSURE MAX TEMPERATURE
 34 bar   230°C/450°F
INDUCTIVE COUPLING（TORQUE Nm）  
 5.4  
Details 白箭头 黑箭头
G2-009
G2-009
G2-009
OUTPUT MAXIMUM SPEED
 0.09 ml/rev   6000 RPM
MAX FLOW RATE MAX FLOW RATE
 @1450PRM 130 ml/min   @2830PRM 250 ml/min
MAX FLOW RATE MAX DIFFERENTIAL PRESSURE
 @6000PRM 540 ml/min  10 bar
MAX INLET PRESSURE WITHSTAND MAX NEGATIVE PRESSURE
 100 bar  250 mbar
TEMPERATURE RANGE VISCOSITY RANGE
  -20°C to 130°C
 5 to 3000 mPas
DIRECTION OF ROTATION INTERFACE SPECIFICATION
 可选  G 1/8 ", NPT 1/8 "
BYPASS OVERFLOW VALVE PRESSURE CONTROL VALVE
 Available  Not available
MAX TRANSMISSION TORQUE OF MAGNETIC DRIVE  
 250 mNm  
Details 白箭头 黑箭头
HF1/005/12
HF1/005/12
HF1/005/12
CAPACITY(WATER) INLET&OUTLET DN
 4.5 ltr/100 rev   25
PRESSURE DIFFERENTIAL SPEED(MAX)
 12bar   1400rev/min
Details 白箭头 黑箭头
PVS Spindle Bobs_Chambers
PVS Spindle Bobs_Chambers
PVS Spindle Bobs_Chambers

PVS Spindles and Chambers

BOB

SHEAR RATE

SAMPLE VOLUME

PVS-B1-D-HC

1.70

23

PVS-B2-D-HC

0.38

40

PVS-B5-D-HC

0.85

30

CHAMBER

 

 

PVS-30 (standard)

For use with B1, B2 or B5 spindle

Triple Annulus

For use with PVS-TA5 B5-D-HC

Details 白箭头 黑箭头
Rheovision
Rheovision
Rheovision

APPLICATIONS  

▪  Fracturing Fluids

▪  Petroleum Products

▪  Drilling Muds

▪  Black Liquor

▪  Volatile Chemicals

Details 白箭头 黑箭头
Valve Ball
Valve Ball
Valve Ball
PART MATERIALS
Santoprene -40°C to 107°C (-40°F to 225°F)
Neoprene -18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
EPDM -51°C to 138°C (-60°F to 280°F)   
Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
Details 白箭头 黑箭头
Valve Seat
Valve Seat
Valve Seat
PART MATERIALS
Santoprene -40°C to 107°C (-40°F to 225°F)
Neoprene -18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
EPDM -51°C to 138°C (-60°F to 280°F)   
Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
Details 白箭头 黑箭头
SK15
SK15
SK15
AIR INLET MAX FLOW RATE
 1/4"BSPT  57lpm(15gpm)
LIQUID INLET MAX PRESSURE
 13mm（1/2"）BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 13mm（1/2"）BSPT  2.4mm(3/32")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  0.15L(0.04gal)
 ANSI DIN(Flanged)  *1 cycle = 2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 3m(10')Dry,9.0m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135℃（275℉）  8KG(AL)/10KG(CS/SS)
Details 白箭头 黑箭头
SK25
SK25
SK25
AIR INLET MAX FLOW RATE
 1/2"BSPT  170lpm(40gpm)
LIQUID INLET MAX PRESSURE
 25mm（1"）BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 25mm（1"）BSPT  6mm(1/4")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  0.42L(0.11gal)
 ANSI DIN(Flanged)  *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 3.5m(12')Dry,9.2m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135℃（275℉）  12KG(AL)/19KG(SS/CI)
Details 白箭头 黑箭头
SK40
SK40
SK40
AIR INLET MAX FLOW RATE
 3/4" BSPT  340.7lpm(90gpm)
LIQUID INLET MAX PRESSURE
 38mm(1-1/2")BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 38mm(1-1/2")BSPT  6.3mm(1/4")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  1.29L(0.34gal)
 ANSI DIN(Flanged)  *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 5.8m(19')Dry,9.2m(29.5')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135℃（275℉）  36KG(AL)/56KG(CI/316L)
Details 白箭头 黑箭头
SK50
SK50
SK50
AIR INLET MAX FLOW RATE
 3/4" BSPT  511 lpm (135 gpm)
LIQUID INLET MAX PRESSURE
 51 mm (2")  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 51 mm (2")  9 mm (3/8")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  1.63 L (0.43 gal)
 ANSI DIN(Flanged)  *1 cycle = 2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 6m(20')Dry, 9.2m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135 °C (275 °F)  43KG(AL)/73KG(CI/316L)
Details 白箭头 黑箭头
SK80
SK80
SK80
AIR INLET MAX FLOW RATE
 3/4" BSPT 988lpm(260gpm)
LIQUID INLET MAX PRESSURE
 76mm（3"）BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 76mm（3"）BSPT  12mm(0.472")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  3.62L(0.95gal)
 ANSI DIN (Flanged)  *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 6m(20')Dry,9.5m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135 °C (275 °F)  75KG(AL)/138KG(CI/316L)
Details 白箭头 黑箭头
PS15
PS15
PS15
AIR INLET MAX FLOW RATE
 1/4"BSPT  52lpm(13.5gpm)
LIQUID INLET MAX PRESSURE
 13mm（1/2"）BSPT  6.9bar(100psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 13mm（1/2"）BSPT  3mm(0.118")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  0.15L(0.04gal)
 ANSI DIN(Flanged)  *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 3.5m(12')Dry,9.2m(30')Wet  PP/PVDF/PPH
MAX OPERATING TEMPERATURE WEIGHT
 PP(80℃)PVDF(95℃)  5.5KG（PP)/7.2KG(PVDF)
Details 白箭头 黑箭头
PS25
PS25
PS25
AIR INLET MAX FLOW RATE
 1/2"BSPT  158lpm(42gpm)
LIQUID INLET MAX PRESSURE
 25mm（1"）FLANGE  6.9bar(100psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 25mm（1"）FLANGE  6mm(0.25")
CONNECTION TYPE DISPLACEMENT PER STROKE
 ANSI DIN(Flanged)  0.42L(0.11gal) *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 3.5m(12')Dry,9.2m(30')Wet  PP/PVDF/PPH
MAX OPERATING TEMPERATURE WEIGHT
 PP(80℃)PVDF(95℃)  12KG（PP)/16KG(PVDF)
Details 白箭头 黑箭头
PS40
PS40
PS40
AIR INLET MAX FLOW RATE
 3/4"BSPT  340lpm(90gpm)
LIQUID INLET MAX PRESSURE
 38mm(1-1/2")FLANGE  6.9bar(100psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 38mm(1-1/2")FLANGE  6.3mm(0.25")
CONNECTION TYPE DISPLACEMENT PER STROKE
 ANSI DIN(Flanged)  1.29L(0.34gal) *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 3.5m(12')Dry,9.2m(30')Wet  PP/PVDF/PPH
MAX OPERATING TEMPERATURE WEIGHT
 PP(80℃)PVDF(95℃)  34KG（PP)/45KG(PVDF)
Details 白箭头 黑箭头
PS50
PS50
PS50
AIR INLET MAX FLOW RATE
 3/4"BSPT  511lpm(135gpm)
LIQUID INLET MAX PRESSURE
 51mm(2")FLANGE  6.9bar(100psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 51mm(2")FLANGE  9mm(0.354")
CONNECTION TYPE DISPLACEMENT PER STROKE
 ANSI DIN(Flanged)  1.63L(0.43gal)*1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 5m(16')Dry,9.2m(30')Wet  PP/PVDF/PPH
MAX OPERATING TEMPERATURE WEIGHT
 PP(80℃)PVDF(95℃)  41KG（PP)/56KG(PVDF)
Details 白箭头 黑箭头
PS80
PS80
PS80
AIR INLET MAX FLOW RATE
 RC 3/4"  988lpm(260gpm)
LIQUID INLET MAX PRESSURE
 76mm(3")FLANGE  6.9bar(100psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 76mm(3")FLANGE  15mm(0.6")
CONNECTION TYPE DISPLACEMENT PER STROKE
 ANSI DIN(Flanged)  3.62L(0.95gal) *1 cycle = 2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 5m(16')Dry,9.5m(30.4')Wet  PP/PVDF/PPH
MAX OPERATING TEMPERATURE WEIGHT
 PP(80℃)PVDF(95℃)  84KG（PP)/138KG(PVDF)
Details 白箭头 黑箭头
SA25
SA25
SA25
AIR INLET MAX FLOW RATE
 1/2"BSPT  170lpm(40gpm)
LIQUID INLET MAX PRESSURE
 25mm（1"）BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 25mm（1"）BSPT  25mm(1")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  0.42L(0.11gal)
 ANSI DIN(Flanged)  *1 cycle = 2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 3.5m(12')Dry, 9.2m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135℃（275℉）  12KG(AL)/19KG(CI/316L)
Details 白箭头 黑箭头
SA50
SA50
SA50
AIR INLET MAX FLOW RATE
 3/4"BSPT  511lpm(135gpm)
LIQUID INLET MAX PRESSURE
 51mm(2")BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 51mm(2")BSPT  45mm(1.8")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  1.63L(0.43gal)
 ANSI DIN(Flanged)  *1 cycle = 2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 6m(20')Dry, 9.2m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135℃（275℉）  36KG(AL)/56KG(CI/316L)
Details 白箭头 黑箭头
SA80
SA80
SA80
AIR INLET MAX FLOW RATE
 3/4"BSPT  988lpm(260gpm)
LIQUID INLET MAX PRESSURE
 76mm（3"）BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 76mm（3"）BSPT  50mm(2")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  3.62L(0.95gal)
 ANSI DIN(Flanged)  *1 cycle = 2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 6m(20')Dry, 9.5m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135℃（275℉）  75KG(AL)/138KG(CI/316L)
Details 白箭头 黑箭头
AC08
AC08
AC08
AIR INLET MAX FLOW RATE
 1/8"  17lpm(4.5gpm）
LIQUID INLET MAX PRESSURE
 1/8" BSPT  6.9bar（100psi）
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 1/8" BSPT  3mm(0.12")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  0.08L(0.017gal)
MAX SUCTION LIFT CAPABILITY  *1 cycle = 2 strokes
 1.5m(5')Dry, 9m(30')Wet MATERIAL
MAX OPERATING TEMPERATURE  UPE/PTFE
 PTFE 100℃（212℉） WEIGHT
 UPE 70℃ （158℉）  1.7KG（UPE）/2.5KG（PTFE）
Details 白箭头 黑箭头
AC15
AC15
AC15
AIR INLET MAX FLOW RATE
 1/4"  52lpm(14gpm）
LIQUID INLET MAX PRESSURE
 1/2" BSPT  6.9bar（100psi）
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 1/2" BSPT  4mm(0.16")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  0.2L(0.043gal)
MAX SUCTION LIFT CAPABILTY  *1 cycle = 2 strokes
 2m(8')Dry, 9m(30')Wet MATERIAL
MAX OPERATING TEMPERATURE  UPE/PTFE
 PTFE 100℃（212℉） WEIGHT
 UPE 70℃ （158℉）  5.4KG（UPE）/8.6KG（PTFE）
Details 白箭头 黑箭头
AC25
AC25
AC25
AIR INLET MAX FLOW RATE
 1/2"  157lpm(41gpm）
LIQUID INLET MAX PRESSURE
 1" BSPT  6.9bar（100psi）
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 1" BSPT  6mm(1/4")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  0.6L(0.13gal)
MAX SUCTION LIFT CAPABILITY  *1 cycle = 2 strokes
 4m(13')Dry, 9m(30')Wet MATERIAL
MAX OPERATING TEMPERATURE  UPE/PTFE
 PTFE 100℃（212℉） WEIGHT
 UPE 70℃ （158℉）  12KG（UPE）/20KG（PTFE）
Details 白箭头 黑箭头
AC40
AC40
AC40
AIR INLET MAX FLOW RATE
 3/4"  340lpm(90gpm）
LIQUID INLET MAX PRESSURE
 1-1/2" BSPT  6.9bar（100psi）
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 1-1/2" BSPT  6mm(1/4")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  2.2L(0.48gal)
MAX SUCTION LIFT CAPABILITY  *1 cycle = 2 strokes
 4m(13')Dry, 9m(30')Wet MATERIAL
MAX OPERATING TEMPERATURE  UPE/PTFE
 PTFE 100℃（212℉） WEIGHT
 UPE 70℃ （158℉）  34KG（UPE）/50KG（PTFE）
Details 白箭头 黑箭头
AC50
AC50
AC50
AIR INLET MAX FLOW RATE
 3/4"  560lpm(148gpm）
LIQUID INLET MAX PRESSURE
 2" BSPT  6.9bar（100psi）
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 2" BSPT  11mm(0.43")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  2.6L(0.57gal)
MAX SUCTION LIFT CAPABILITY  *1 cycle = 2 strokes
 5m(16')Dry, 9m(30')Wet MATERIAL
MAX OPERATING TEMPERATURE  UPE/PTFE
 PTFE 100℃（212℉） WEIGHT
 UPE 70℃ （158℉）  56KG（UPE）/92KG（PTFE）
Details 白箭头 黑箭头
W25
W25
W25
AIR INLET MAX FLOW RATE
 1/2"BSPT  170lpm(40gpm)
LIQUID INLET MAX PRESSURE
 25mm（1"）BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 25mm（1"）BSPT  6mm(1/4")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  0.42L(0.11gal)
 ANSI DIN(Flanged)  *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 3.5m(12')Dry,9.2m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135℃（275℉）  12KG(AL)/19KG(SS/CI)
Details 白箭头 黑箭头
W40
W40
W40
AIR INLET MAX FLOW RATE
 3/4" BSPT  340.7lpm(90gpm)
LIQUID INLET MAX PRESSURE
 38mm(1-1/2")BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 38mm(1-1/2")BSPT  6.3mm(1/4")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  1.29L(0.34gal)
 ANSI DIN(Flanged)  *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 5.8m(19')Dry,9.2m(29.5')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135℃（275℉）  36KG(AL)/56KG(CI/316L)
Details 白箭头 黑箭头
W50
W50
W50
AIR INLET MAX FLOW RATE
 3/4" BSPT  511 lpm (135 gpm)
LIQUID INLET MAX PRESSURE
 51 mm (2")  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 51 mm (2")  9 mm (3/8")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  1.63 L (0.43 gal)
 ANSI DIN(Flanged)  *1 cycle = 2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 6m(20')Dry, 9.2m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135 °C (275 °F)  43KG(AL)/73KG(CI/316L)
Details 白箭头 黑箭头
W80
W80
W80
AIR INLET MAX FLOW RATE
 3/4" BSPT 988lpm(260gpm)
LIQUID INLET MAX PRESSURE
 76mm（3"）BSPT  8.6 bar (125 psi)
LIQUID DISCHARGE MAX DIAMETER SOLIDS
 76mm（3"）BSPT  12mm(0.472")
CONNECTION TYPE DISPLACEMENT PER STROKE
 BSPT(Threaded)  3.62L(0.95gal)
 ANSI DIN (Flanged)  *1 cycle=2 strokes
MAX SUCTION LIFT CAPABILITY MATERIAL
 6m(20')Dry,9.5m(30')Wet  AL/316L/CI
MAX OPERATING TEMPERATURE WEIGHT
 135 °C (275 °F)  75KG(AL)/138KG(CI/316L)
Details 白箭头 黑箭头
H40
H40
H40
RATIO MAX FLOW RATE
 2:1  272lpm(72gpm）
AIR INLET MAX PRESSURE
 3/4"BSPT  14bar（203psi）
LIQUID INLET MAX DIAMETER SOLIDS
 1.5"（Thread Flange Clamp）  6.3mm（0.207"）
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 1.5"（Thread Flange Clamp）  1.1L(0.29gal)*1  cycle = 2 strokes
CONNECTION TYPE MATERIAL
 BSPT(Threaded)  316L/CI
 DIN ANSI JIS(Flange) WEIGHT
 TRI-Clamp  76KG(CI/316L)
MAX SUCTION LIFT CAPABILITY MAX OPERATING TEMPERATURE
 5.8m(19')Dry, 9.2m(29.5')Wet  135℃（281℉）
Details 白箭头 黑箭头
H50
H50
H50
RATIO MAX FLOW RATE
 2:1  408lpm(108gpm）
AIR INLET MAX PRESSURE
 3/4"BSPT  14bar（203psi）
LIQUID INLET MAX DIAMETER SOLIDS
 2"（Thread Flange Clamp）  9mm(0.375")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 2"（Thread Flange Clamp）  2.6L(0.7gal) *1 cycle = 2 strokes
CONNECTION TYPE MATERIAL
 BSPT(Threaded)  316L/CI
 DIN ANSI JIS(Flange) WEIGHT
 TRI-Clamp  93KG(CI/316L)
MAX SUCTION LIFT CAPABILITY MAX OPERATING TEMPERATURE
 6m(20')Dry, 9.2m(30')Wet  135℃（281℉）
Details 白箭头 黑箭头
H80
H80
H80
RATIO MAX FLOW RATE
 2:1  790lpm(209gpm）
AIR INLET MAX PRESSURE
 3/4"BSPT  14bar（203psi）
LIQUID INLET MAX DIAMETER SOLIDS
 3"（Thread Flange Clamp）  15mm(0.6")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 3"（Thread Flange Clamp）  5.15L(1.32gal) *1 cycle = 2 strokes
CONNECTION TYPE MATERIAL
 BSPT(Threaded)  316L/CI
 DIN ANSI JIS(Flange) WEIGHT
 TRI-Clamp  200KG(CI/316L)
MAX SUCTION LIFT CAPABILITY MAX OPERATING TEMPERATURE
 6m(20')Dry, 9.5m(30')Wet  135℃（281℉）
Details 白箭头 黑箭头
PDSK40
PDSK40
PDSK40
BULK DENSITY MAX FLOW RATE
 0.08-0.8 g/cm³  2500 Kg/h
AIR INLET MAX PRESSURE
 3/4"BSPT  8.6bar （125psi）
LIQUID INLET MAX DIAMETER SOLIDS
 38mm(1-1/2")BSPT  6.3mm(1/4")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 38mm(1-1/2")BSPT  1.2L(0.34gal) *1  cycle = 2 strokes
CONNECTION TYPE MATERIAL
 BSPT(Threaded)  AL/316L/CI
 ANSI DIN(Flanged) WEIGHT
MAX SUCTION LIFT CAPABILITY  36kg(AL)/56(CI/316L)
 5.8m(19')Dry, MAX OPERATING TEMPERATURE
 9.2m(29.5')Wet  135℃（275℉）
Details 白箭头 黑箭头
PDSK50
PDSK50
PDSK50
BULK DENSITY MAX FLOW RATE
 0.08-0.8 g/cm³  3500 Kg/h
AIR INLET MAX PRESSURE
 3/4"BSPT  8.6bar （125psi）
LIQUID INLET MAX DIAMETER SOLIDS
 51mm(2")BSPT  9mm(3/8")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 51mm(2")BSPT  1.63L(0.43gal) *1  cycle = 2 strokes
CONNECTION TYPE MATERIAL
 BSPT(Threaded)  AL/316L/CI
 ANSI DIN(Flanged) WEIGHT
MAX SUCTION LIFT CAPABILITY  43kg(AL)/73(CI/316L)
 6m(20')Dry, MAX OPERATING TEMPERATURE
 9.2m(30')Wet  135℃（275℉）
Details 白箭头 黑箭头
PDSK80
PDSK80
PDSK80
BULK DENSITY MAX FLOW RATE
 0.08-0.8 g/cm³  5500 Kg/h
AIR INLET MAX PRESSURE
 3/4"BSPT  8.6bar （125psi）
LIQUID INLET MAX DIAMETER SOLIDS
 76mm（3"）BSPT  12mm(0.472")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 76mm（3"）BSPT  3.62L(0.95gal) *1  cycle = 2 strokes
CONNECTION TYPE MATERIAL
 BSPT(Threaded)  AL/316L/CI
 ANSI DIN(Flanged) WEIGHT
MAX SUCTION LIFT CAPABILITY  75kg(AL)/138(CI/316L)
 6m(20')Dry, MAX OPERATING TEMPERATURE
 9.5m(30')Wet  135℃（275℉）
Details 白箭头 黑箭头
E25
E25
E25
MOTOR POWER MAX FLOW RATE
 1.5 kw  9m³/h
MAXIMUM MOTOR SPEED MAX PRESSURE
 129 r/min  4bar （58psi）
LIQUID INLET MAX DIAMETER SOLIDS
 25mm（1"）BSPT  6mm(1/4")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 25mm（1"）BSPT  0.42L(0.11gal)
CONNECTION TYPE  *1 cycle=2 strokes
 BSPT(Threaded) MATERIAL
 ANSI DIN(Flanged)  316L/CI/PP/PVDF/PPH
MAX SUCTION LIFT CAPABILTY MAX OPERATING TEMPERATURE
 3.5m(12')Dry,9.2m(30')Wet  135℃（275℉）
Details 白箭头 黑箭头
E40
E40
E40
MOTOR POWER MAX FLOW RATE
 3 kw  20m³/h
MAXIMUM MOTOR SPEED MAX PRESSURE
 111 r/min  4bar （58psi）
LIQUID INLET MAX DIAMETER SOLIDS
 38mm(1-1/2")BSPT  6.3mm(1/4")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 38mm(1-1/2")BSPT  1.29L(0.34gal)
CONNECTION TYPE  *1 cycle=2 strokes
 BSPT(Threaded) MATERIAL
 ANSI DIN(Flanged)  316L/CI/PP/PVDF/PPH
MAX SUCTION LIFT CAPABILTY MAX OPERATING TEMPERATURE
 3.5m(12')Dry,9.2m(30')Wet  135℃（275℉）
Details 白箭头 黑箭头
E50
E50
E50
MOTOR POWER MAX FLOW RATE
 4 kw  24m³/h
MAXIMUM MOTOR SPEED MAX PRESSURE
 102 r/min  4bar （58psi）
LIQUID INLET MAX DIAMETER SOLIDS
 51mm(2")BSPT  9mm(3/8")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 51mm(2")BSPT  1.63L(0.43gal)
CONNECTION TYPE  *1 cycle=2 strokes
 BSPT(Threaded) MATERIAL
 ANSI DIN(Flanged)  316L/CI/PP/PVDF/PPH
MAX SUCTION LIFT CAPABILTY MAX OPERATING TEMPERATURE
 5m(16')Dry,9.2m(30')Wet  135℃（275℉）
Details 白箭头 黑箭头
E80
E80
E80
MOTOR POWER MAX FLOW RATE
 7.5 kw  48m³/h
MAXIMUM MOTOR SPEED MAX PRESSURE
 84 r/min  4bar （58psi）
LIQUID INLET MAX DIAMETER SOLIDS
 76mm（3"）BSPT  12mm(0.472")
LIQUID DISCHARGE DISPLACEMENT PER STROKE
 76mm（3"）BSPT  3.62L(0.95gal)
CONNECTION TYPE  *1 cycle=2 strokes
 BSPT(Threaded) MATERIAL
 ANSI DIN(Flanged)  316L/CI/PP/PVDF/PPH
MAX SUCTION LIFT CAPABILTY MAX OPERATING TEMPERATURE
 5m(16')Dry,9.5m(30.4')Wet  135℃（275℉）
Details 白箭头 黑箭头
Diaphragm
Diaphragm
Diaphragm
PART MATERIALS
Santoprene -40°C to 107°C (-40°F to 225°F)
Neoprene -18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
EPDM -51°C to 138°C (-60°F to 280°F)   
Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
Details 白箭头 黑箭头
Flap
Flap
Flap
PART MATERIALS
Santoprene -40°C to 107°C (-40°F to 225°F)
Neoprene -18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE) 4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N) -12°C to 82°C (10°F to 180°F) 
EPDM -51°C to 138°C (-60°F to 280°F)   
Fluorine rubber (FKM) -40°C to 177°C (-40°F to 350°F) 
Details 白箭头 黑箭头
Air valve
Air valve
Air valve
Aluminum alloy(electrophoresis),anodized aluminum, PP polypropylene, 316L stainless steel
Details 白箭头 黑箭头
Previous page
1
HOME
PRODUCTS
AODD Pump EODD Pump Metering Pump External Gear Pump Micro Magnetically Gear Pump Rotary Lobe Pump AMETEK Brookfield In-line Products Accessories
APPLICATIONS
Lithium Ion Battery Production Bioengineering & Pharmaceutical Paint & Coatings Environmental & Wastewater Treatment Electronics & Semiconductor Chemical Process Mining & Metallurgy
SUPPORT
Brochure Operation and Maintenance Manual Videos Guides
COMPANY
About SKYLINK Certifications and Quality Standards
NEWS
News Exhibition
CONTACT US

CONTACT US

Add: No. 438, Jinyuan 8 Road, Jiading District, Shanghai, China

Service line: 400-891-9365

© 2021 Skylink Fluid Technology(shanghai) Co.,Ltd.  All rights reserved.       沪ICP备12048026号